Can you build a modern road for tabletop zombie games in just a few days?
As stated in my previous post, 4 days prior to our Salute-n-zombie-table-top-gamingathon weekend I foolishly decided that I needed a road for ‘On The Road’ scenario for our play-test game of Iron Ivan Games ‘No More Room In Hell.’ As if I didn’t have enough to do already.
The scenario features a road running the length of a 4’ by 4’ table, jammed packed with, to quote the book ‘as much rubble and destroyed cars as your toy box can provide.’ I didn’t have the rubble but that wasn't what I pictured in my head and I had a shed-load of cars. I just needed the road.
 |
| Kinda like this? Image from dennisflood.com |
The concept was to build, as quickly as possible, a road that could be laid over any gaming surface (city, woodland or desert) that ran the width of the table and looked as much like the World Works Games roads as possible. I really like the WWG roads, however, having got increasingly interested in the hobby side of things I wanted to try and replicate that look as much as possible with a 3D road. Challenging, but seeing the superb standards that many bloggers are showing in their modern basing I thought it was a simple matter of translating the skills to a bigger scale. i.e. treat the roads like bases - long, thing, giant bases.
The Sketch
No sketches actually, but plenty of scribbled calculations. After a few tweaks and adjustments I settled on making the roads approximately 4 inches wide with 12 inch and 24 inch section lengths. To allow for a double width road across a 4’ by 4’ table. I made 10 feet all in all, giving a little extra for creating other city-wide layouts.
The Realisation
6mm MDF was the material of choice. It is about the thinnest I find I can make terrain pieces and keep warping within reasonable limits.
I cut four 24 inch and two 12 inch sections. I covered one side in PVA glue, brushing in the direction of the road, then added sand, sprinkled through a sieve. Note: It is recommended that you don't use the sieve from your kitchen. I did. I had to buy a new one right away. Whoops - Dog-house!
Once the PVA was dry I sprayed the roads with Halfords Matt Black Acrylic undercoat. I used a relatively light coat to help fix the sand.
 |
| Sand covered road sections - Pink undersheet optional |
Once the PVA was dry I sprayed the roads with Halfords Matt Black Acrylic undercoat. I used a relatively light coat to help fix the sand.
 |
| Spray-painting underway. |
When the spray paint dried I painted the whole thing with a coat of diluted black house paint, about 1:4 mix of paint to water. This was to fully seal the sand and soak into any parts that regular painting wouldn’t reach.
 |
| 'Blaaaaaaack!' |
Dry-brushing followed with a ½ inch brush with long bristles using Games Workshop Fortress Grey and Space Wolves Grey. I then air-brushed patches, tyre marks and a darkened centre-line on each section using Miniatures Paints #86 - Umber.
 |
| Airbrushed centre-lines. |
Yellow edging and white centre-lines were added by hand using various acrylic paints, using a ruler as a guide. Then came a few oil stains added with Windsor and Newton Nut Brown Ink.
 |
| Someone needs a top-up. |
Next, small cracks were painted and highlighted using acrylic paint.
 |
| That'll need some attention before the frost hits. |
A coat of acrylic spray varnish was added and, once that was dry, flock and a few Army Painter grass tufts and static grass were added to finish off the look.
 |
| Army Painter - Grass Tufts |
The Result
I am pretty pleased with the final result, especially considering the relatively short time it took to finish. In conclusion, yes, you can build a modern road for tabletop zombie games in just a few days.
 |
| The finshed road - 4 days flat. |
I didn’t add the flock or the tufts until after the game it was made for (I only bought the tufts at Salute, the day before we played the scenario - The battle report is to follow). There was a small amount of warping in the 24 inch pieces, tolerable but I’d like to find a way to fix it if I can. The airbrush helped considerably with the ‘grubby’ feel. It’s a new purchase and I have been pleasantly surprised by how easy it has been to use. More on the airbrush next time.
0 Comments